Silicone resealing

The new roof
can wait.

Book your inspection

Stop chasing leaks.

A large white resealed flat roof with coated vents and rooftop equipment under dramatic clouds

Stop leaks. Keep the roof.

Protect your asset value. Keep the roof you have in service and the replacement off the capital plan.

Keep people dry. No buckets in the hallway and no calls after the first storm of the season.

Fix the seams and soft spots now and prevent further damage that turns a roof you can reseal into a roof you have to replace.

Your roof covers more than the building. Protect what’s inside from water, downtime, and the ceiling tiles you keep replacing.

A freshly resealed white flat roof at golden hour beside an occupied brick office building

No tear-off.
No shutdown.

Your tenants stay put. Silicone is applied over the existing roof, so there is no tear-off, no dumpster in the lot, and nothing to close.

A coat. Not a roof.

Resealing keeps the roof you already paid for and puts the work into one coat over the top. No tear-off, no dumpsters, no new roof to fund, and the big decision stays off this year’s budget.

  • 0 tear-off
  • 0 primer
  • 1 coat
  • No dumpsters
  • Small crew
A finished white silicone flat roof stretching to the parapet under a clear sky

Whole roof.
Or one section.

A roof that leaks is not the same as a roof that’s finished. Repair what’s failing, reseal the whole roof or only the section that needs it, and keep everything underneath in service.

That’s a plan you can take to ownership: the roof you already have, resealed with 100% silicone instead of replaced.

Manufacturer warranties available up to20 yearslabor and material, through the manufacturer’s approved applicator program

1 coat
no primer, no mixing
0°F to 120°F
application range, so a cold day doesn’t stop the work

Repaired first. Then sealed.

Resealing starts with what’s failing. Seams, drains, and penetrations are repaired and sealed first. Then one coat of silicone ties the whole surface together.

A failing membrane seam sealed under a smooth white silicone layer at a roof edge

Bonds to what’s already there.

Almost nothing to throw away.

Replacing a roof sends the old one to the landfill. Resealing keeps it in service under a solvent-free, low-VOC coat of silicone, so the roof you have stays out of the landfill and a white finish reflects the sun instead of soaking it in.

See if your roof qualifies.

Before you take a replacement quote to ownership, find out whether the roof can be repaired and resealed instead. Silicone needs a clean, dry, sound roof underneath it, so the inspection documents what’s failing, what needs repair first, and whether resealing is the right call.

Book your inspection